PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
Stackable Incubator Shakers
(with or without CO2 Controller)
————————————————
Stackable incubator shakers are the ideal choice for optimizing laboratory space without compromising the advantages of performing large capacity incubations.
The products are designed with sliding platforms and light controller for easy of access to samples.
Model | IS-RDS3 |
Speed | 30~300rpm |
Speed Precision | ±1rpm |
Orbit Diameter | Φ26mm / 1.02" |
Maximum Capacity | 50mlx84/100mlx42/150mlx42/ 200mlx40/250mlx40/500mlx24/ 1000mlx15/2000mlx12/3000mlx8/5000mlx6 |
Platform Dimensions | 740mmx500mm / 29.13x21.65" |
Number of Platforms | 1Piece / Accessories available |
Temp. Range | Ambient -15℃~60℃(Low Limit:4℃) |
Temp. Sensitivity | 0.1℃ |
Temp. Uniformity | ±0.3℃(@37℃) |
CO2 Sensor | N/A |
CO2 Control Sensitivity | N/A |
CO2 Concentration Indicator | N/A |
Light Intensity | N/A |
Automatical Defrost | Yes |
Display | LCD |
Timer | 0~999 Hours |
Dimension External (WxDxH) | 1240x777x670mm / 48.82x30.59x26.38" |
Dimension Internal (WxDxH) | 840x590x483mm / 33.07x23.23x19.02" |
Power | <1100W |
Power Supply | 220V, 60Hz |
Weight | 220 kg (Single unit) |
Max. Height | 2M |
Accessories
——————————————————
Model | Part Number | Specifications | Note |
Flask Clamp | IS-A1 | 50ml | Made of polished stainless steel sheet. They can be fixed on any platform of all models of incubator shakers. |
IS-A2 | 100ml | ||
IS-A3 | 150ml | ||
IS-A4 | 200ml | ||
IS-A5 | 250ml | ||
IS-A6 | 500ml | ||
IS-A7 | 1000ml | ||
IS-A8 | 2000ml | ||
IS-A9 | 3000ml | ||
IS-A10 | 5000ml | ||
IS-A50 | 25ml |
Model | Part Number | Specifications | Note |
Test Tube Rack | IS-A11 | 40xΦ14mm(0.55") | Made of stainless steel and high grade ABS plastic material. Compatible with all of Incubator Shaker Dimension External (WxDxH) 262x112x140mm (10.31x4.41x5.51") |
IS-A12 | 40xΦ16mm(0.63") | ||
IS-A23 | 40xΦ18mm(0.71") | ||
IS-A24 | 27xΦ22mm(0.87") | ||
IS-A42 | 21xΦ30mm(1.18") |
Model | Part Number | Specifications | Note |
Adjustable Test Tube Rack | IS-A20 | 40xΦ14mm(0.55") | Made of stainless steel and high grade ABS plastic material. Compatible with allof Incubator Shaker. Dimension External (WxDxH): 267x125x172mm (10.51x4.92x6.77") |
IS-A21 | 40xΦ16mm(0.63") | ||
IS-A30 | 40xΦ18mm(0.71") | ||
IS-A31 | 27xΦ22mm(0.87") | ||
IS-A32 | 27xΦ30mm(1.81") | ||
IS-A37 | 24xΦ30mm(1.81") | Made of stainless steel, rack for 300mm long tubes. Dimension External (WxDxH): 267x125x172mm (10.51x4.92x6.77") |
Model | Part Number | Specifications | Note | |
Multifunction Spring Platform | IS-A19 | WxDxH:165x165x80mm (13.78x9.45x3.15") | For all shakers. | Made of stainless steel. Can be fixed onto shaking platform. |
IS-A27 | WxDxH:350x240x80mm (13.78x9.45x3.15") | |||
IS-A22 | WxDxH:450x400x80mm (17.72x15.75x3.15") | For all of incubator shakers except IS-RSDA. | ||
IS-A14 | WxDxH:428x295x80mm (16.85x11.61x3.15") | |||
IS-A39 | WxDxH:720x440x80mm (28.35x17.32x3.15") | For IS-RDS3,RDS4 | ||
IS-A48 | WxDxH:840x440x80mm (33.07x17.32x3.15") | For chest-type incubator shakers |
Model | Part Number | Specifications | Note |
Fixture for Separating Funnel | IS-A25 | WxDxH:355x402x153mm (13.98x15.83x6.02") | Used for separating funnel with volume 5000ml. |
IS-A35 | N/A | Used for separating funnel with volume greater than 500ml. |
Model | Part Number | Specifications | Note |
Infusion Bottle Clamp | IS-A33 | 500ml | Made of stainless steel. Can be fixed on all platforms of incubator shakers. |
IS-A34 | 1000ml |
Model | Part Number | Specifications | Note |
Sticky Pad | IS-A47 | WxD: 140x140mm (5.51x5.51") | Use for all shaker, wipe with water,dry for few minutes, the mat will be self-adhesive on surface. |
Model | Part Number | Specifications | Note |
Rack for Stackable Incubator Shakers | IS-A29 | WxDxH: 948x630x225mm (37.32x24.80x8.86") | Support stackable incubator shakers (up to two units). |
Model | Part Number | Specifications | Note |
Flask Holder | IS-A26 | 5000ml | Hold 5000ml Flask. (For IS-RDS,IS-RDS3C, IS-RDH2, IS-RSH2) |
Model | Part Number | Specifications | Note |
96-Well Microplate Holder | IS-A13 | WxD: 136x95mm (5.35x3.74") | Can be fixed on any platform of incubator shakers. |
Model | Part Number | Specifications | Note |
Universal Spring Platform | WBA30 | WxDxH: 370x240x180mm (14.57x9.45x7.09") | Previous Model: SY-2330-03A, Maximum Capacity:1 |
Model | Part Number | Specifications | Note |
Deep Well Plate Clamp | IS-A61 | WxDxH: 780x450x84mm (30.71x17.72x3.31") | / |
Product related questions and answers
There are no posts to show